+1 610.524.8800

For Solvent Based Processing

Model 31

Intrinsically Safe Aspirator-driven Sampler
with Vapor Condenser

To ensure that the sensor sees a continuous clean sample gas flow, many solvent based processes require the removal of varying amounts of entrained vapors.  Designed for process temperatures at or slightly above ambient, the integral Neutronics vapor condenser removes solvent and water vapors from the sample gas stream before they can contaminate the sensor.  It consists of a heat exchanger powered by a vortex cooler.  The vortex cooler provides the refrigeration for the condenser assembly, collecting heat from the sample flow and condensing entrained vapors.  For processes with high operating temperatures, additional preconditioning components are typically included.

Data sheet

INTRINSICALLY SAFE ASPIRATOR-DRIVEN SAMPLER WITH VAPOR CONDENSER | FOR SOLVENT-BASED PROCESSING

  • Intrinsically Safe Design – with no moving parts, the pneumatically-powered Model 31 sampler is suitable for hazardous area locations
  • Corrosion Resistant NEMA 4X Enclosure – suitable for indoor or outdoor use with protection against ingress of dust and water
  • Integral Flow Switch – opens contacts in alarm when sample gas flow falls below a preset level
  • Single or Dual Sensor Compatible – option for redundant dual sensors enhances reliability
  • Internal Vapor Condenser – air-cooled heat exchanger powered by a high efficiency vortex cooler with no moving parts removes contaminants from the sample gas stream
  • Low Maintenance Package – high quality components with few replacement parts minimizes maintenance costs and unplanned downtime
  • Sample Gas Pressure: -25 inH2O to 5 psig
  • Sample Gas Flow: 5 slpm (± 1 slpm) total flow
  • Drive Gas: Instrument quality air or nitrogen, 35 psig (minimum) @ 2 scfm (± 0.5 scfm)
  • Sample Filter: 90 micron sintered metal, 316 SS
  • Sampling Method: 5 slpm flow via 55 inH2O vacuum draw created by the aspirator
  • Vapor Conditioning: Air-cooled vortex-driven vapor condenser with continuous drainage
  • Wetted Materials: Stainless steel, glass, Teflon
  • Outside Dimensions: 23.62″(w) x 14.96″ (h) x 8.6″ (d) (600 x 380 x 211mm)
  • Weight: 50 lbs. (22.7 kg)